Bardineto (climbing from Toirano, return via Zuccarello)


This is an easy (4-6%) 15 km climb that will bring you to 813 meters above the sea with a beautiful view over Toirano and Borghetto. Passing Bardineto, you will have another short climb (Passo di Scravaion) before a long and scenic descent to Castelvecchio di Rocca Barbena and Zuccarello.
Customize track and change the departure location: 


  If you wish to see an indication of the slope in the altitude chart using color-coding, click here.  
Completing this track should take approximately 3 hours 1 minute for an average cyclist.  Click here to check track duration for various levels of cyclists <- Click!


  Start location:  Albenga   Start altitude: 9  m  
  End location:  Albenga   End altitude: 9  m  
  Track length: 68.6  km   Total ascent: 1,067  m  
  Europoints (difficulty): 665.1  pts   Lowest altitude: 6  m  
  Maximum slope (100m): 7.2  %   Highest altitude: 819  m  
  Flat distance (<=1%): 18.7  km   Climbing dist. 2%-5%: 9.0  km  
  Climbing distance: 24.0  km   Climbing dist. 5%-8%: 9.4  km  
  Descent distance: 25.9  km   Climbing dist. >8%: 0.0  km  


View in Google Earth (either save ".kml" file for later viewing, or open it directly into Google Earth)


Below, you will find a GPX route file content describing the track you have selected. GPX route files allow GPS satellite navigation systems (such as Garmin Edge 605) to guide you through your waypoints. To create a GPX route file, simply click the link below the text box (Save ".gpx" file). File names proposed by the system start with the distance (in km), followed by the difficulty (Europoints/100), followed by the name of the start location (e.g. "63-06_Albenga.gpx" means 63 km of distance, 600 Europoints, starting from Albenga).

Typically, GPX files are transferred from your computer to the navigation system using a USB cable (please consult the user's manual of your device, or visit the section on Garmin Edge 705).


 Save ".gpx" file for satellite navigation


If you wish to retrieve this route,
use either the http address, or alternatively use the QR code below:

QR Code